Frame & mount for Waveshare 10.1DP-CAPLCD screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks to download & ❤.
The LCD frame holds the Waveshare 10.1DP-CAPLCD securely. This LCD has no features for making a physical connection to a frame, so I designed the system you see in the photos. Attach the back brace to the bottom pegs at a 45 degree angle, then rotate to vertical and slide over the upper pegs. You can put anything small through the holes in the upper pegs – tie wrap, wire, piece of filament, or even a toothpick. (The second photo is of the previous version, but correctly shows the assembly.)
There are two sizes, one for Mk4 buildplate, second is the one I printed on Prusa XL. The larger one is 12 mm wider & taller than the Mk4 version.
The LCD is heavy, so don't be stingy with your perimeter count or infill. I used 3 perimeters/20% infill on my latest print. Even 4 perimeters/25% infill wouldn't be a bad idea.