Waveshare 10" Displaymount with raspi in wall box (10.1DP CAPLCD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complex half in wall mount for a raspberry and a waveshare display.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 1228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Hi,
did this for a collegue, maybe someone can use it.
Sorry for the german filenames had no time to clean it up.
the freecad files are included so you could mess around with it and improve it.
I personally never used it - just printed the files.
There are 2 clamms build of 2 Parts each that are mounted “in” the wall ->_13.jpg
There are “slides” to slide in the Display with the mounted raspberrypi
The red printed parts are the springs that clamp the part in the slides, it snaps.
To release it you have to push the red latches from top and bottom to the middle.
Materials:
- Prusa galaxy black PLA for the visible frame
- All other Parts where printed in PETG
You may need some screws and some inserts
- 4x 1.6mm flat head screws
- 8x 3mm inserts
- 8x ~12-16mm 3mm screws (I used cylindric head)
You may need additional screws to mount the case to the wall
Attention - the Waveshare-Wallmount-V1-20-Display-MountKorb file seems to have some minor bugs - repair or ignor them - my collegue said it is still usable