Switch Pro Controller Mount (not Lite edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the Nintendo Switch to the official Pro Controller for a comfortable grip in handheld.
- Ocena
- 4,833 / 5
- Polubienia
- 106
- Pobrania
- 615
- Wydruki
- 14
- Wyświetlenia
- 2567
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Update: 2024-04-14
New centered version with access to charging jack of the switch.
The down side now is that is consists of two parts. They interlock via a dovetail-connection so they dont come apart when the switch is in there. :-)
Original Post
This design Mounts the Nintendo Switch to the official Pro Controller in a simple, light design.
My Goal was not to use supports at any costs. This is how the non centered version came to life.
The most recent version has it all: No supports needed and access to the charging jack.
The Fusion 360 files and step are included as well, if you want to tinker with it.
Versions:
- Basic Version:
Mounts Switch in the center, but the charging jack ist covered. (pictures 5, 6 and 7) - Non-Centered Version: charging jack is accessible & clip does not cover up venting holes (pictures 8 and 9)
- NEW (April 2024) centered version with access to charging
consists of two parts as shown in the pictures 1-4.
I reccomend the new centered version.
The Print was done in PETG to give the part a litte bit of flexibility.
If you have any suggestions, like a different angle something, please let me know.