ragRipper Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the ragRipper so it can be zip tied to a 25mm shelf pole.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the original model to attach to my table at work. I decide to attempt to make one to attach to our shelving unit that holds all of our rag boxes at work. This is what I came up with. I beefed it up a bit as my coworkers are pretty hard on shop tools. I guessed on the leg diameter to be 1" but made the model 25mm. It fits on the 1" with a little bit of a gap. I just attached it with some heavy duty zip ties. I added the flats on the side so it can be printed that way using supports. That's the best way I could think of. Still pretty new to making models and 3D printing. Forgot to take pictures, i'll add some later.