Mini 13 Ugandan Silver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The mini 13 jointed figure into Silver. just the base knuckles figure except with the legs and arms swapped for height
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
I made the mini thirteen jointed figure into the Ugandan Silver meme. This is just the base figure with the armored parts attached, however its significantly smaller having no knees or elbow joints. Check out the Ugandan Knuckles figure for directions, tips, and comparisons. I did swap the arm joints and leg joints because I always felt silver was taller.
same as the mini 13 I just print it at a 0.15mm layer height or resolution or whatever you call it. I use Cura so I just use the normal setting.
BEFORE YOU PRINT: ask yourself, Do you know de wae?