Gloomhaven Monster - Rending Drake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monster standee replacement for the board game Gloomhaven.
- Ocena
- 4,5 / 5
- Polubienia
- 31
- Pobrania
- 353
- Wydruki
- 5
- Wyświetlenia
- 1375
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Monster standee replacement for the board game Gloomhaven.
Standee Count: 6
Based off the artwork work of Alexandr Elichev.
Works with number bases found here: https://www.thingiverse.com/thing:2872339
Check out the awesome remixes of this model by Gronis: https://www.thingiverse.com/thing:3463069
Print instructions
This was printed with a 0.25mm nozzle. I haven't tried it on a 0.4mm yet, but looking at sliced files it should print fine with a little loss of detail.
Post-Printing
I had good luck using standard washes when painting this model. With other FDM prints I have had issues with washes getting absorbed into the print. I think what helped with this one was the use of filler primer and 0.05mm layer height.
Encouragement
If you like what I'm doing or use this in your game consider buying me a coffee or sending me a tip:
