Reveni Meter - Pendant Holder / Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pendant holder for the Reveni light meter, optimized for quick one-handed operation directly off a lanyard.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this holder for the Reveni light meter which is optimized for quick, one-handed operation directly off a lanyard. The front cap is meant to keep potential fuzz out of the sensor and it stays in place thanks for a small registration pins. A piece of standard 1.75mm filament is used for the hinge. Simply push the filament from the side which has a wide enough opening while the other side narrows down so the filament stays in place via friction… then cut off the filament which still sticking out.
You will require a fairly thin lanyard for it to pass through the hole.
Ofcouse this holder/case can also be used without a lanyard if all you need is a compact solution for protecting the sensor and for comfortable holding.