Lamp shade for Harris Gin bottle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY lamp shade with stand and holder for Ikea STRÅLA
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
Simple lamp shade with holder intended for use with glass bottle (originally with Harris gin from outer Hebrides).
- Shade holder:
Print with tree supports. Add perimeters and infill
- Lamp shade:
Print in vase mode. Recommended bigger nozzle. I printed with 0,8 and result is very good.
- STRÅLA holder:
Print with tree supports. Add perimeters and infill.
Mechanism for tightening inside the bottle use M4 hex nut and M4x25 countersunk screw (20-30 length should work too). Tolerances could be improved, but it worked for me. Also it could be lowered the height of STRÅLA holder by disassembling it and removing some parts (feature improvements)
- Material:
Printed from white PETG
- BOM
STRÅLA - 203.664.04 (Ikea)
M4 nut
M4x25 screw
- Improvements:
- You can add some pattern to the lamp shade for nicer look and made it also stiffer.
- Also you can download some other lamp shades and scale them to inside diameter 196 mm.
- Originally I wanted to put some cloth (tweed) around lampshade, but I like this bare look. Maybe V2 version will be with cloth and in this case I would go with transparent PETG.
