7/10 Port Sirex Siren
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the very first Sirex siren on Printables. This is a 7/10 port Sirex siren and is easy to print!
Print settings:
Printer: Bambu Lab X1C
Filament: PLA, PETG (Rotor in PLA, rest in PETG.)
Color: Gray, Yellow (Stator and rotor in gray and the rest in yellow)
Infill: 15% Or higher
Supports: Only on the stator top. Use support blockers and put them inside of everything but the top rim.
Brim: No
Rafts: No
Requirements:
280 Micro DC Motor.
9V Battery Box (Preferably)
250MM x 250MM x 250MM printer size.
Extra wires just in case
Assembly Instructions:
Assembly Instructions are coming soon. Please be patient while I get these written. Thank you!
I hope you can make this siren yourself. If you can't or you need it smaller, message me and I can try to make accommodations for your printer.
Enjoy the model and have fun!