Bendy Bender - the articulated bender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bendy Bender uses jointed sections and ball joints to allow him to hold any position. all parts assemble using no glue
- Ocena
- 4,6 / 5
- Polubienia
- 151
- Pobrania
- 529
- Wydruki
- 5
- Wyświetlenia
- 3140
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution
my first attempt at making somthing which isnt functional, and im happy with the result. i wanted a bit of a challenge so i could build my skill on solidworks, the files are completely open for any modifications you may want.
quickly swap the eyes and mouth to change expressions and store spare parts inside the body.
instructions:
prints fine in PLA, the joints will wear quickly so i recomend using PETG if you want to move the joints around a lot.
snap the pieces together, the legs use 6 joints and the arms use 5. may require a bit of force and wearing in before the joints move smoothly.
cut off some black filament and put them behind the eyes. cut the filament flush with the back of the eyes.
put the eyes in the visor first then snap the visor onto the head, it may be a tight fit depending on how good your supports are.
no supports required other than the head, apply supports as seen in the pictures.
the head and body will also require paint on seams so that the seams are on the back, otherwise the slicer will try and put them on the front which doesnt look good.
have fun!