Quarry tub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quarry Tub / dump car for garden railway.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 467
- Wydruki
- 6
- Wyświetlenia
- 1688
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Works with LGB/Playmobil and Piko standard couplers. Length over all 170 mm.
Couping hook fixed in newer Version
You will need:
1 ea frame (rahmen)
2 ea axle (Achse)
2 ea sleeve (Achshuelse)
4 ea wheel (Rad)
4+x ea pin (Achsclip)
2 ea support for hutch (KipperStuetze)
1 ea hutch (KipperMulde)
Prepare the assembly of the axle by putting the pins (orange) into the axle mounting.
Push the axle trough the axle mounting, threading wheel, sleeve, wheel like shown
Push in both pins.
Repeat with second axle.
Use Pins to fix the hooks in their mounts
Newer Version: If you want to add some ballast open the lid in the middle and put it in.
Put in the hutch supports
and mount the hutch.
PS: Grass green doesn't seen to be an adequate color. Painting helps ;)
Alternative: build a low side wagon
