Perforated Canister with Screw Lid For Carbon Pellets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,61 € – 3,19 € netto (bez VAT)
Dla pliku: cylinder-and-lid-v5_0.4n_0.15mm_ASA_COREONE_2h24m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,90 € netto (środek widełek).
- Masa podana przez autora
- 22 g
- Czas druku podany przez autora
- 2,41 godz.
- Materiał u źródła
- ASA
- Materiał wyceny
- ASA
- Drukarka wyceny
- Bambu Lab X1 Carbon - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Perforated screw-top can for holding activated carbon pellets, designed to effectively neutralize odors.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D model is a perforated canister with a screw-top lid, designed to house activated carbon pellets. The perforations on the canister allow for airflow, enhancing the activated carbon's ability to absorb and neutralize unwanted odors effectively. The screw-top lid ensures a secure closure, preventing any spillage of the carbon pellets while maintaining easy access for refills. Ideal for use in various environments such as homes, offices, and other odor-prone areas, this canister provides a practical and efficient solution for maintaining a fresher atmosphere.
Materials
Print Settings
This model is easy to print as long as your printer can bridge and can do decent overhangs. My Mini+ has no issues printing this model in ASA.
- Layer Height: 0.15mm (Quality/Structural)
- Parameters: 2
- Infill: 15% (this isn't very important, but doesn't add much time or material)
- Material: ASA recommended, this ASA works well for me¹ (something water, UV, and heat resistant)
- Supports: None (if your printer can bridge decently)
1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!