Elegoo Centauri Carbon Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser for the Elegoo Centauri Carbon
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 548
- Wydruki
- 3
- Wyświetlenia
- 10 471
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Created a Riser for the Elegoo Centauri Carbon. The files are "Riser_BL", "Riser_BR", "RIser_FL", and "Riser_FR". The names correspond with the location of the piece. Riser_BL means Back Left and so on.
I had to, last minute, make some corrections to the side pins. It is not an extremely tight fit but it works well.
Riser_BL = Back Left corner piece
Riser_BR = Back Right corner piece
Riser_FL = Front Left corner piece
Riser_FR = Front Right corner piece
Front_Pin = Pin to connect the (2) front corner pieces
Back_Pin = Pin to connect the (2) back corner pieces
Side Pins = Pins to connect the front to the back (print 2 of these)
I printed these on the Centauri Carbon using Inland PLA+. The only setting I changed was the infill to Gyroid.