Sonoff Temperature Sensor SNZB-02P AAA case remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification for Sonoff Temperature Sensor SNZB-02P that will allow use of 2xAAA batteries instead of a CR2477 battery.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modification for Sonoff Temperature Sensor SNZB-02P that will allow use of 2xAAA batteries instead of a CR2477 “coin battery”.
Why do you need such modification:
- longer lifespan for battery compared to coin battery in terms of capacity and temperature range (especially below 0*C)
- cheaper and more popular batteries
I could not find the battery holders the original model was designed around.
I found these on Amazon, and they fit IF I made the interior mounting posts shorter.
https://www.amazon.com/Battery-Plastic-Applicable-Electronic-Appliance/dp/B07ZKSJ9FT
or
https://www.amazon.com/JWISLAND-Battery-Holder-x1-5V-Leads/dp/B0D1DPLZ77
I used supports when printing the button.
I experimented with printing the case top scaled to 100.2%, 100.4% and 100.5% so it would fit tighter.
I have included some photos of the modification to the original Sonoff unit.
I also published a wall mount to fit this case:
https://www.printables.com/model/1084344-wall-mount-for-remixed-sonoff-snzb-02-temperature