Benchy holder - Sea of Benchies
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a modular holder for Benchy.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
Make it as wide as you wish, in one, two, three or four rows. You build the size you want by connecting pieces with room for one or four Benchies. There are end pieces for the number of rows you select. There are half size pieces if you want the Benchies staggered. There are pieces with the text PLA, PETG, ABS, TPU, PC and TPU. The text is 0.4 mm high, so if your printer allows change of colour, you can change it of the two top layers (assuming 0.2 mm layer). There is a blank piece, but you can also one standard piece around, so it is ready if you print more Benchies.
You can use Benchies as colour samples of your filamen