1 / 2
Protractor for tube bending 4-7 Clr 0 to 180 degrees.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for roll cages and tube chassis
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Just print out 2 mains rivet them together and the tube size you have 100% infill.
38, 40, 45 and 50mm or 1-1/2, 1-5/8, 1-3/4, and 2"
Press them in on the dashed line for your central line radius your bending die has
4", 4½", 5", 5½",6", 6½", 7"
and cut of the tabs your not using (that's your measuring point) and the exes outside the tube width.
220x220 and 200x250 bed maybe other.