Holder for Eklind T-Handle Hex (Allen) Keys - 6 piece set - two mount options: magnets or screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnet slots make it great to slap on side of a steel tool chest or other metal surface. Screw holes for other mounting
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools


Screw holes are 4.5 mm in diameter.
Magnet slots make it great to slap on side of a steel tool chest or other metal surface.
See below for a link to the right disk magnets.
This holder is designed for this set of T-Key allen wrenches:
EKLIND 55166 Cushion Grip Hex T-Key allen wrench - 6pc set Metric MM sizes 2-6 (6In shaft)
Amazon affiliate link: https://amzn.to/4hamngK

These are great quality tools, and affordable too. I have two sets just in case I have a lot going on!
Regarding the two mounting options:
For magnets, these are the ones it's designed for:
Neodymium Disc 12 x 3 mm
Amazon affiliate link: https://amzn.to/3F4siqn

For screws, it depends on what you're screwing into. The screw holes are 4.5 mm in diameter.
I have my two sets magnetically mounted — one on a steel tool chest, and one on my band saw, because it's nearer to my assembly table.


The magnets just get CA-glued in place.

Note: On my US General tool chest from Harbor Freight, the top draw can open with the holder mounted, and the next drawer down can also open without having to move anything.

Printing tips:
- Print as oriented
- No supports needed
- Perimeter walls: 2
- Infill: Adaptive Cubic at 10%
- If you want to get two-color treatment like I did, with the tool size highlighted in a different color, all you have to do is add (in your slicer) a pause (M25) at about layer #253 (give or take) which just happens to be at a Z height of 70.84 mm. Adding this in OrcaSlicer is easy — just look for a YouTube video on it if you're not familiar. I'm including my OrcaSlicer setup as a .3mf file, which includes the M25 pause, and you can use the setup for reference, or perhaps even for printing.
Change log:
- March 2, 2025 - initial upload
I printed this on an excellent, affordable, fast, CoreXY printer called Flashforge Adventurer 5M (or AD5M for short). As of when I first posted this, Amazon is offering a $100-off coupon for the AD5M! Here's an affiliate link to it: https://amzn.to/4bmKWFY

Speaking of which, below are some other cool options for the AD5M…
Some of my other AD5M-related design work:
- https://www.printables.com/model/785667-flashforge-adventurer-5m-ad5m-simpler-easier-faste
- https://www.printables.com/model/813334-flashforge-adventurer-5m-ad5m-printed-camera-mount
- https://www.printables.com/model/814546-flashforge-adventurer-5m-ad5m-nozzle-storage-box-t
- https://www.printables.com/model/827706-flashforge-adventurer-5-ad5m-led-mod-accessory-buc
- https://www.printables.com/model/828632-flashforge-adventurer-5-ad5m-led-light-bars-mod-ac
- https://www.printables.com/model/834011-flashforge-adventurer-5m-ad5m-side-cutter-mount-v1
- https://www.printables.com/model/834097-flashforge-adventurer-5m-ad5m-improved-spool-holde
- https://www.printables.com/model/886714-flashforge-adventurer-5m-ad5m-filament-cutter-comp
- https://www.printables.com/model/1119699-flashforge-ad5m-enclosure-hinge-remixed-to-be-easi
- https://www.printables.com/model/1119872-flashforge-ad5m-door-handle-remixed-to-print-witho
- https://www.printables.com/model/1129412-safety-cover-for-side-cutter-tips
- https://www.printables.com/model/1130485-flashforge-adventurer-5m-ad5m-minimal-diy-enclosur
Use Klipper interface stuff on AD5M stock hardware…
- …such as Mainsail, Fluidd, and Klipperscreen, etc, with the stock Klipper install on the AD5M's main board.
- Get it here: https://github.com/xblax/flashforge_adm5_klipper_mod
Check out other cool AD5M related options here:
My PayPal tip jar: https://paypal.me/design8studio