Google Nest Audio Ceiling Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for hanging the Google Nest Audio from the ceiling. Can likely also be used as a wall mount (untested).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple ceiling mount for the Google Nest Audio smart-speaker/assistant.
It can likely also be used as a wall mount, since the “belts” are a fairly tight fit and the friction between them and the fabric-covered surface should be plenty to keep it in place. I have not tested this though.
Distance between the mount's screw holes is 45 mm.
You should print the belts flat on the print bed, to ensure high strength - same goes for the mount-part.
Supports required for the mount-part, not the belts.
You can choose to glue the belts onto the mount-part's tabs or use a small self-tapping screw.
I used two M3 10mm self-tapping screw - screw color doesn't matter since it will be hidden against the ceiling/wall when mounted.