BTTF Time machine (1:8) Wire splitter (8 wires)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wiresplitter with way more detail than the Eaglemoss wiresplitters used on the back to the Future Delorean…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This is a wiresplitter with way more detail than the Eaglemoss wiresplitters used on the back to the Future Delorean timemachine (in and arround the reactor platform). This tiny model is very hard to print and paint. Use a raft and print on 0.05mm. For the wires to fit, I stripped the wires and used some glue to fasten the copper wires into the splitter.
The original splitters have 9 wires going in and out, these are 8 to match the number of wires on the EM model and also for allowing the model to be slightly bigger.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Yes
Supports:
No
0.05
Infill:
100%
Category: Vehicles