Just another Papertowel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple and easy-to-handle Papertowel Holder Suitable for standard rolls and jumbo rolls
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Print the bracket twice and insert a standard 32mm plastic conduit from the hardware store to hold the roll
32mm conduit is commonly used for electrical installations; pretty cheap :)
Cut the conduit to your desired length (needs to be cut in right angle!)
conduit length = length of the roll + 2 x blind hole depth of the brackets + 2 x desired space between roll and bracket
Place the brackets with the conduit inserted in right angle to the desired mounting surface and mark the drill holes
Tip: if the brackets dont't come out of your printer in a perfect 90° angle, you can put some stickers or sticky tape next to the mounting holes on the bottom side to align the mounting angle (see picture)
a third hand might help to mark the drill holes when assembly is positioned in place, alternatively mark and fix just one bracket first and align the rest of the assembly in a second step
Drill the holes and use 3.5mm or 4mm countersunk screws to fix the brackets
Insert and change the roll easily by pulling the brackets slightly to the outsides, no need to release screws.
Enjoy using your new Papertowel Holder ;)