Ceiling mount for Eufycam Solo Pan&Tilt P24 camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a dumb box.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 921
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to install an Eufy pan&tilt camera on the ceiling where there were power cables installed previously for a lamp.
I wanted to use an old 5V 2A USB power supply which was 30 mm tall and hence it did not fit so I made this extender to the junction box.
You can attach the supplied bayonet mount to the top with 2 pcs of M3 screws. There are holes for M3 heat set inserts on the top part - I do recommend Stefan's stuff or the ones from Ruthex: https://www.amazon.de/-/en/CNC-Kitchen-Original-threaded-insert/dp/B09CL413N4
The hole for the USB cable is 8x13 mm with 3 mm roundings in the corners.