1 / 2
30cc Ultra Stick landing gear spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm spacer for the Hanger9 30cc Ultra Stick landing gear to gain extra propellor clearance.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
20mm spacer for the Hanger9 30cc Ultra Stick landing gear to gain extra propellor clearance. Just use 20mm longer bolts to the original mount.
Printing in PLA with 4 walls makes a nice solid standoff to spread the load across the bottom of the fuselage. If you need it taller or thinner, you can adjust the vertical axis on your slicer.
