Next Gen USB Cable Winder / Organizer Bigger Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An entirely new approach to cable winding, especially for beefy USB C cables. Stacking possible.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 148
- Wydruki
- 3
- Wyświetlenia
- 915
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original very much, but needed a bigger ropening for some really beefy USB C cables that I have. Dimensions are 100 mm inner diameter by 28 mm height, with a 9x13mm hole for the USB C plug. Fits my 3m long braided cable that's 5mm in diameter. I recommend leaving about 15-20cm out of the cable end that's on the inside like in my photo, to allow enough length to be pluugged into something without fully unwinding the cable. If you don't need that, leave just the plug sticking out on the inside. If you leave any length of cable out on the inner end that's shorter than ~10cm, the cable tends to catch on itself when winding it, making the process extremely annoying.