Ender-3 V3 SE Nozzle Cam Endoscope Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an 8mm diameter endoscope to an Ender-3 V3 SE using existing M3 bolt locations.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This mounts an 8mm diameter endoscope to an Ender-3 V3 SE using existing M3 bolt locations.
The endoscope I used is cheap and great, it's 1080p, a driverless UVC webcam standard that works with a Raspberry Pi, choose a soft cable model, 1M long works for me, but longer is probably fine. You absolutely don't need to get the same model, but this is the one I used:
https://www.aliexpress.com/item/1005006710505036.html
I'm not great with CAD, so this is my 5th version getting the aim right.
Hole in the holder is for an M3 heat-set insert, and I used an M3 grub screw to secure the camera tightly.
The GIF is super-blurry, the actual video out of this thing is crystal-clear 1080p, it's sharp and in-focus.