Dog bags holder with a bags retracting feature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dog bags container which allows to retract bags
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
OK, I know that there are quite a few dog bags holders on Printables. But I missed one important feature among them - when you pull bags out usually it is not very convenient to roll them back into the container.
Here is a holder with a lid which allows to rotate it together with a bag roll (no theread). I designed it for my Purlov rolls with a hole diameter = 7,9 mm (to fit tightly).
Additionaly I have also designed a button (print in place) which allows to hold a roll from outside and to be able to retract bags in case if a bags roll is not tight enough on a spinle. If you need a different spindle diameter, write please down in a comment - I can add it (I use only one kind of bags and do not now how about others). If a hole in your roll is bigger - just use an embedded button and it should work, too.
I like to hang it on my neck so it is designed for that purpose (to mount on a paracord).
MATERIAL: I used PLA and it looks fine.
SUPPORTS: No
BRIM: No