1 / 2
Wire Management Loops
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
The original design was quite a bit smaller and very difficult to get the hinge to separate after printing. Most of the ones I printed would break.
I designed this one to be larger for holding more cables and bigger cables. I also made the hinge a bit more robust.
There is a large and small, both are the same width and height, but the smaller one has a 40 mm opening and the large has a 70 mm opening