Wallstickers / Glow in the dark - Space theme / Star Wars / ISS space station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various kids room wall stickers with a space in mind.
- Ocena
- 5 / 5
- Polubienia
- 389
- Pobrania
- 1957
- Wydruki
- 48
- Wyświetlenia
- 5349
- Oceny
- 42
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
By using different layer height it is possible to achieve contrast between the brighter and darker areas of the pictures, dark parts and shadows are printed thin and will let more color through from the painted wall below and charge up less as opposed to the thicker areas.
The stickers also work with normal “non-glow” filament, especially if the contrast is high, i.e. if the wall paint is in a darker hue and the filament is light. Best result will thus be with a black surface and white filament.
Optimal layer height is 0,2 mm.
To resize these only size in the X and Y direction and keep the Z at original height (about 1-2 mm depending on model). A tip is to resize the X-wing to create a squadron or to make different size stars to cover the wall with similar irregularity as the actual space.
I have uploaded a couple of other similar collections, so check my other prints for more.