Lynx/Lonx/Minx 2.1 modified parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some files I needed modified to fit the hardware I was able to source. This is the parts I used to build my Lonx & Minx.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi all,
I've been 3d printing for under a year, and do a fair amount of tinkering on Tinkercad - which I'v found quite user friendly for beginners.
I needed to modify some of the files for the Lonx blaster to better match the hardware I had available to me in the uk and wanted to put this out there for anyone that might find it useful..
1) Catch washer modified to fit the washers that the nut would fit through.
2) Receiver modified to have heat inserts for the barrel retention.
3) Minx / Lonx/ plunger Guide, as I believe the aluminium one is causing metal shavings in the plunger tube.
4) Minx / Lonx M5 threaded extended rod cover.
5) The priming block was modified to accept M3 15mm Hexagonal standoff.
6) Bars cutting template.
7) Lonx / Minx plunger guide 30mm & K25 size springs.
8) spring rest K25.
9) Plunger head M5 hole.
10) Modified ram.
11) Nut cover for the tensioner.
12) Long barrel stabiliser.
i have added a link to the hardware I used to build my blasters.
https://docs.google.com/spreadsheets/d/1rCuwRWwYV00H8bbMw1SxeBkCroAFZcKc724dwjzxPnw/edit?usp=sharing
I hope this helps 🙂