Slim can holder for 2024 Subaru Crosstreck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a unique problem that needed a solution. I drink V8 Splash needed a solution.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I had a unique problem that needed a solution.
I drink the V8 Splash on my way to work and the cup holder is too big so I needed to create something to hold it a bit better while I am driving around. So I got to work.
I didn't realize until I was messing around that the bottom circumference is smaller than the top of the cup holder…so I had to compensate for that… I have to say it turned out almost perfect!
Bottom= 71.5mm
Tall= 60.429mm
Can size= 54.005mm (perfect size to allow room to pull out)
The flange on top= 84.811mm
I did it at 5% infill and no supports. I printed upside down also.
This cup holder will work for the one closest to the passenger side (I claim that as the driver =) ) While I was taking photos I realized that it will work with the other cup holder also however not as sturdy. But feel free to adjust!
I have included the STL and OBJ from Tinkercad for your customization.