3D Benchy Super Yacht
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super Yacht, the 88m Pegasus Benchy version, overhangs, angles, ridges, and long straight testing available.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by the worlds first 3D Benchy and the worlds first 3D printed super yacht, the 88m Pegasus yacht by Jozeph Forakis (link), I give you the 3D Benchy Super Yacht.
Included in this mashup are printing measure and calibrate items. Instead of a chimney I have replaced that with hydroponic farm tube, a free standing structure that starts early in the printing and then rises to the top canopy where it is then attached.
At the front we have an incredible tip that overhangs at a gravity defying 60 degrees. A pool area with pass through views that create bridging through the main deck.
You will notice a single line cut from the 3rd deck in a vertical line, if this shows up in your model, then you truly have mastered the finest of details, or scaled it up to a crazy percentage.
Angles on every level of 45 degrees or greater, various sharp and rounded edges to validate the printers linear alignment. Long stem to stern sides to be sure artifacts are not part of your printers repertoire.
Finally, at the back, no super yacht is worth it's millions without a launch deck that contains a super arch to test how flat that top aft section will show.
Happy print testing with this modern marvel that one day could be reality.
**UPDATE: Included a full size two part version in the 3MF file that allows for testing multicolor with the hydroponic farm tube.