Elegoo Centauri Carbon Nozzle Wiper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative nozzle wiper that uses widely available Bambu a1 wipers
- Ocena
- 5 / 5
- Polubienia
- 235
- Pobrania
- 726
- Wydruki
- 2
- Wyświetlenia
- 6452
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alternative nozzle wiper that uses half of a Bambu Lab a1 silicone nozzle wiper. The silicone wiper that came with the Centauri started losing bristles on my third print and I wanted a cheap replacement. I chose to use a1 wipers because they are widely available, I got 12 for $3 on AliE.
No required hardware simply reuse the factory screws, but any short m2 screw will work. The a1 wiper has 14 rows of bristles, cut after 7 which is exactly in half to get it the right size.
This wiper does NOT interfere with bed leveling and can be used to fix the z offset issue in early Centauri Carbon units.
I recommend printing at least out of petg due to chamber temps. No supports required print vertically on the screw face. No modification of the wiping gcode is needed.