1 / 1
Tapered thread Bowden tube coupling PC4-M6 Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed PC4-M6 Bowden tube coupling.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The original design is great, but I found 2 problems. I found that the connector broke off easily because there just wasn't a lot of meat on the threaded portion. The other thing is that the threaded portion just didn't thread in very well without shrinking it down in the slicer.
In this design, I redid the threads and I also made it so that the bowden tube stops before going into the threaded portion of the connector. This allows there to be more material and hopefully make it at least a little stronger.