1 / 9
BTT ADXL345 mount for Creality Sprite Extruder + clamp for the bed.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attache the sensor to the extruder and bed.
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 329
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Attach the BTT ADXL345 board to your Sprite Extruder for input shaping. For the y axis you can attach it using the clamp to the bed. The board should have the same orintation as on the extruder.
Axis mapping if attached as on the pictures:
axes_map: -x,-y,-z
You can use M3 screws for attaching the board to the mount.
