1 / 3
Birdhouse 2" Pipe Mount for Homegrown Cedar Products Bluebird House — zdjęcie 1
1 / 3

Birdhouse 2" Pipe Mount for Homegrown Cedar Products Bluebird House

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mount to allow attachment of a Homegrown Cedar Products Bluebird House on a piece of 2" schedule 40 PVC pipe

Ocena
0 / 5
Polubienia
7
Pobrania
24
Wydruki
0
Wyświetlenia
522
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We use 2" schedule 40 PVC pipe for mounting birdhouses on our property.  We use 5 foot sections of PVC pipe fitted over heavy duty 6 foot “T” posts driven into the ground.  The 6', heavy duty, “T” post provides stability and the PVC provides a clean appearance and a birdhouse attachment point.

This mount provides for mounting a Homegrown Cedar Products Bluebird house like this one: https://www.lowes.com/pd/HomeGrown-10-875-in-H-Eastern-Red-Cedar-Wood-Bluebirds-Nesting-Box-Bird-House/1000184213

The mount incorporates a cap to close the top of the pipe and has one center hole for the mounting screw, which will penetrate both the mount and the PVC pipe, to secure the house to the pole.  The “wings” engage the sides of the house and provide for a stable attacment with no potential to tilt or swing, but are shallow enough not to impede opening the side for cleaning.

The mount should be printed from UV and weather resistant material.   I used white ASA to coordinate with the white PVC.   The mount is a slip fit on the 2" PVC pipe.

I recommend using at least a 20% infill and enough walls for at least a 2mm thickness.

Fusion 360 source and .STEP files are included in addition to the .STL.

Tagi