Additional Files for Knitting Loom: Snap-Fit with Row Counter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's an excellent snap-fit knitting loom already created, I'm just adding some items it doesn't include.
- Ocena
- 0 / 5
- Polubienia
- 65
- Pobrania
- 231
- Wydruki
- 1
- Wyświetlenia
- 1677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of VladTheInhaler's excellent Knitting Loom: Snap-Fit with Row Counter, to add some pieces they didn't include. My model adds many types of things:
XL and Large counter links and the dials to go with them.
Updated dials and number files for all of the dials, for multi-color printers. As of this writing, the original uses the same dial for both “Regular” sizes as well as the Small size, so the same files from my set should work for them all.
A two-color XL link, for multi-color printers. This lets you set up one peg as a “stitch marker” for repeats, or you can use it as the first and/or last peg in marking a whole section that doesn't start/end nicely at the beginning of a link. I'm not sure if I'll make smaller ones at this stage, but if you'd like them, please comment below with which sizes you need.
Links with three pegs for the XL and Large sizes. As with the two-color link, comment if you'd like that in a specific smaller size.
A set of "XS" links - they're a 5/16" gauge as compared to the 3/8" gauge of the original Small links. I had to make the counter link five pegs long, so I also made a regular five peg link.
An updated set of "fine" links (1/4" gauge). I found that once we get down to this size, the original pegs were so short and the linking bumps so small that the originals weren't really usable. Since a project with sock yarn can have many rows, I added a third digit to the counter link.
An updated set of "regular" links (1/2" gauge). I found that the length of the pegs was awkward - just a little bit too short for my hook - so I made them longer.