1 / 2
Knipex Long Nose Pliers Holder for Elegant Screwiverse, Honeycomb Storage Wall (HSW) — zdjęcie 1
1 / 2

Knipex Long Nose Pliers Holder for Elegant Screwiverse, Honeycomb Storage Wall (HSW)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for Knipex 26 12 200, using Elegant Screwiverse and HSW

Ocena
0 / 5
Polubienia
8
Pobrania
40
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holder for the Knipex 26 12 200 pliers. Might work with other models (e.g. 70 02 160 side cutters fit loosely, 03 02 180 pliers are too big), but no guarantees.

I wasn’t a big fan of having to pay attention to the insert/screw orientation/clocking, and the general wobbliness of the original setup, so I came up with this clamping screw method. The screw is too short to reach the back of the insert, allowing you to tighten it down properly. The protrusions on the back of the holder stop it from rotating.

The holder is designed to flex, so you can just ram the pliers into it – but it’s a lot easier to rotate them into place, as demonstrated in the gif.

 

Two versions of the holder are available (and a STEP file, in case you want to modify something), with or without the tab for 18mm label tape. Currently, it only works with Elegant Screwiverse, but I could splice in the screw from the original Screwiverse design if anyone wants it.

You need an insert from here – it's mainly meant to be used with the 1P ones, but it can fit on some of the other ones, depending on orientation. The screw has a 6mm hex socket.


Use PET-G. Print orientation of the holder is specified in an image. The screw should be printed on the face with the hex socket. It will probably print fine without supports for the screw hole, but I haven’t tested it.

 

Roughly inspired by this design, but it's not an actual remix.

Tagi