The Little Benchy That Could
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experience Benchy in a fun new way, as a Train!
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 210
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Public Domain
This was My attempt to reimagine Benchy as a train.
I have tried to create a model that was original but also captured the main themes of Benchy,
namely: a cute but simple design and easy printability.
I have included everything you need to make your own Benchy train.
All the models are ready to print right out of the box and do not require supports.
Assembly is fairy simple: the engine requires three axles four small wheels at the front and two big wheels at the back, and four small wheels for each caboose.
First insert one end of an axle into a wheel(you might have to use glue) then put the axle through the appropriate hole, depending on the quality of your printer you have to sand the axle to get it to spin properly in the axle hole, then put the matching wheel on the end of the axle(I designed the axles to be a little too long so you will probably have to trim it down).
I highly recommend using brims on all the models, but the axle does not need a brim.
Please let me know if there is a problem with the models.
This is my first model, let me know what you think!