OV3660 camera mount for voron 0 tophat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for OV3660 camera for voron 0 tophat.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
There are already two available camera mounts on printables that fit OV3660, but I was not able to user either one of them
- https://www.printables.com/model/703993-voron-0-usb-camera-mount
- Great mount, but unfortnutely I bought a 110 fov camera with a long lens that was sticking out to the hotend path. The view from this point was great, but I'd rather not crash into the camera. I oroginaly tried to remix it, but was not able to position the camera anywhere near the leadscrew without it getting in the way
- https://www.printables.com/model/891146-ov3660-camera-mount-for-voron-v0
- This one was not working for me as it put the lens at the bed level and I could not see on the bed for the first layers.
So where to put this stupid big camera on V0? Only tophat was left to try out and that is where this model comes in. The position is not ideal as the hotend and gantry gets in the way of the full picture, but better than nothing and more than enough for print monitoring.
It is designed as a 45° to the extrusion and 30° angled down. Camera is mounted with 4 M2 screws (selftaping or even regular work) and 2 M3x8 BHCS to the extrusion that can be accessed even with camera attached. Simple mount the camera, open tophat, slide it on of the rear extrusions and tighten the M3 screws.