Halfing Rogue (20mm + chonky version) (DND / TTRPG)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a Halfling rogue on a 20mm baseplate with a chonky / "heroic scale" version. They are both about 22mm in…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a Halfling rogue on a 20mm baseplate with a chonky / "heroic scale" version. They are both about 22mm in height.
For printing I recommend printing on their backs. I really like the flowing cape on this model - capes are kind of a pain to clean support from and this one is not an exception. I have a small hobby knife and was able to clear it out but without that it might be a pain. You may notice a spot of red on the chonky model, I did manage to cut myself on the supports somehow - that was not with the knife (cut away from yourself!)
See my other halfling models here: https://www.printables.com/@adamnant_1815442/collections/2169740
Category: Other