Industrial-themed Headphone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A headphone holder that clamps onto your desk and looks as if it can straight out of a workshop!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This industrial headphone holder is able clamp onto your desk to hold your headphones when you're not using them, and looks strong enough to hold a tank. To print your own:
Recommended Print Settings:
- Layer height: 0.2mm for the holder, but I recommend 0.16 for the bolt
- Infill: 20% Triangle Infill
- Can be printed without supports, but there are bridging spots
- Printed in silver PLA, but most non-flexible materials should work
Printed on its side (and with a well-tuned printer), the holder can be printed without supports. The bolt prints from the top.
Once both pieces are printed, the bolt might need some loosening, so try screwing it in before securing it to the desk. When you're ready, simply slide the holder onto your desk, screw in the bolt, and now you have a sturdy place to put your headphones!