1 / 4
DIY 20,000mAh 3D Printed Power Bank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here you’ll find the complete 3D model files (STL) for all printed parts used in this build.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 442
- Wydruki
- 0
- Wyświetlenia
- 2076
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (49)Powiązane
This project shows you how to build a powerful 20,000mAh power bank using minimal materials, a 3D printer, and basic electronics skills. The design uses PLA-printed parts, an IP5328P module, 4×18650 cells, and a custom battery holder made from aluminum and wire. My step-by-step guide is on Instructables (this link)