XRP Robot Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Official 3D files for the XRP Robot. XRP is an open source platform built to be your first steps into engineering!
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 1687
- Wydruki
- 3
- Wyświetlenia
- 5698
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
These are the official printable files for the XRP Robot Kit, available from SparkFun here!
For printing, .2mm layer height, 10% fill, two outer layers, three top and bottom layers is recommended. Grid fill pattern is preferred. You should not need to turn on brim or support material settings. A single print in place break away support is included in the chassis file.
The CAD is open source via OnShape here!
The XRP kit ships with 7 printed plastic parts:
(1) XRP Chassis - The main chassis for the robot. All the other part attach to this chassis. This should be printed upside-down, with the logo side against the bed.
(1) XRP Line Sensor Mount - A clip to attach the reflectance sensor to the frame.
(1) XRP Ultrasonic Mount - A clip to attach the ultrasonic distance sensor to the frame.
(1) XRP Lifting Hook - A little lifter arm that attaches to the servo.
(1) XRP Servo Mount - The clip that attaches the servo to the frame.
(1) XRP Battery Cover - A cover for retaining the batteries that snaps into the bottom of the chassis.
(2) XRP Wheel - The wheel that attaches to the motors. You'll need two for your robot!
Learn More about XRP at experientialrobotics.org