Eufy E340 Doorbell Camera Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple low-profile cover/weather hood for the Eufy E340 Doorbell Camera
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 365
- Wydruki
- 0
- Wyświetlenia
- 1496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple cover/weather hood for the Eufy E340 Doorbell Camera with a small hole in the top for the extraction tool. I wanted something low profile that would keep rain and snow off the camera as much as possible without covering the lenses or lights. Simple Tinkercad build with some contours, no supports needed.
I recommend printing this in a UV/outdoor resilient material, though for my prototype I used PETG with a 0.4mm nozzle and standard 0.2mm layers. Note that if you use material that shrinks a bit, you might want to print this a little wider and taller (e.g., 102%) - there should be enough play in the hole locations to keep it aligned.