1 / 2
Anker PowerConf C200 Eye Level Web Cam Monitor Mount — zdjęcie 1
1 / 2

Anker PowerConf C200 Eye Level Web Cam Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimal monitor mount for the Anker PowerConf C200 Web Cam that lowers it to eye level

Ocena
0 / 5
Polubienia
4
Pobrania
24
Wydruki
0
Wyświetlenia
503
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple, minimal-but-stable monitor mount for the Anker PowerConf C200 web cam. I wanted it to sit a little lower so I could look directly into the camera when on a Zoom call. It takes up a little bit of monitor real estate, but I intentionally made it small so that was minimal.

I recommend getting a 90-degree adaptor for your USB-C cable, and all you'll need is a bolt that fits the camera's mounting threads and potentially a nut/washer unless you have a short bolt like the one pictured here.

This can definitely be printed in basic PLA, but I used PETG for a little more durability. 0.4mm nozzle, 0.2mm layers. I recommend printing it on its side and using tree supports. When removing the tree supports from the slot, be careful because that material is intentionally thin so it takes up less vertical space on the monitor.

I should mention that I sized the depth of this thing for a 27" monitor and I use a standing desk, so your mileage may vary. Feel free to remix for your specific needs!

Tagi