Flashforge Adventurer 5M extruder housing (work in progress)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extruder housing - untested
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 1826
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
i try make model of extruder housing for my printer, because original was damaged with unclog tool. THIS MODEL IS UNTESTED, so if anyone send me feedback, i will be glad for that. original back plate should be fit to this.
Update 13.4.2025 - added pictures from assembling. it should be fully function. i have one assembled, but its not tested in printing.
Update 19.4.2025 - its fully function and its tested (load/unload filament) successfully, still untested in printing. still need small correction but now it is usable
Update 7.1.2026 - v5 - small design changes. v6 - with small inspection window-for test-i dont know if it will be useful.
Printing info (SLA):
Printer: Anycubic photon (with mono upgrade from chitu)
Slicer: Chitubox Basic 2.3
Profile: Elegoo Mars 2 Pro, changed exposure time from 2.5s to 1.7s for accuracy
Resin: Creality Standard Resin
Be sure your SLA printer is calibrated for accuracy.
Assembly notes:
Use all parts from original extruder include screw for tension.
M3 threads for tension screw and fan must be tapped.
For fan use M3x16 screws with flat head, or use original screw (not needed tapped).