1 / 5
Drill Dust Collector V3_remix_@AK3D_ male and female cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
original model_@AK3D_modified stopper and added cap for the bottle
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
print Prusament PetG
0,15mm structural
infill 15% gyroid
6 perimeters


CAP_print Prusament PetG
0,15mm structural
4 perimeters

bottom layer full 8

I recommend smoothing the thread with P220 sandpaper or abrasive wool, then the thread can be easily screwed in.
