1 / 4
Cascade card wallet V2 with texture and contact info — zdjęcie 1
1 / 4

Cascade card wallet V2 with texture and contact info

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

5,51 € – 6,74 € netto (bez VAT)

Dla pliku: Card+wallet+V2_0.15mm_PLA_MK3S_7h38m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 6,12 € netto (środek widełek).

Masa podana przez autora
45 g
Czas druku podany przez autora
7,64 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Hugo's awesome wallet design with a bit of extra flavour

Ocena
0 / 5
Polubienia
6
Pobrania
30
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Loved Hugo's design. However, I wanted to add some texture and my contact info on the surface. Simply turning on fuzzy skin did not do the trick because I didn't want it on the lever. Besides, the top part (where the gaps started) will have texture on both the outside and the inside since topologically they're the same surface now… So I ended up adding a bunch of modifiers to ensure that texture is added only where I want. Hope this can save some time for others. 

 

To use this: 

  1. Download the .3mf file (DO NOT USE THE .gcode FILE DIRECTLY) 
  2. Load the project into PrusaSlicer
  3. (Optional but recommended) Set infill to 100%
  4. Turn on Fuzzy Skin on the outside walls
  5. Change the text to your personal info
  6. Adjust the size and location of this box if needed
  7. (Optional) Turn on ironing on topmost surface only 
  8. (Optional) Turn on Organic support on the printing surface only. The overhang threshold can be set lower, like 20 or something. This can save some materials.
  9. Export G-code and print! 

 

Disclaimer: I did not modify the model in any way. Just sharing a printing setting so hopefully I'm not violating the Standard Digital File License.…