1 / 1
BC-250 Heat sink mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a heat sink mount of the BC-250 it uses this heat sink https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 443
- Wydruki
- 0
- Wyświetlenia
- 6023
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (1)Kolekcje (39)Powiązane
I made a heat sink mount of the BC-250 it uses this heat sink https://www.amazon.com/dp/B0CLLJPXVN?ref=ppx_yo2ov_dt_b_fe
I used the intel clip bracket and some of the hardware included as well as left over hardware from removing the stock heat sink
The holes are sized so you can either use m4 bolts and self tap from the bottom or screw them through and use m4 nuts on the top
