1 / 1
Honda CB350 K0 1969-1970+ Battery Holder — zdjęcie 1

Honda CB350 K0 1969-1970+ Battery Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modified battery holder to fit a Lifepo4 Starter battery for a stock vintage Honda CB350.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

I set out to find a LiFePO4 starting battery for my stock 1970 CB350. Frustrated with the limited options in smaller batteries and the challenge of finding the right pole orientation, I came across the YTX14AH-BS battery. Confident it would fit the original battery holder, I gave it a shot—only to find it was just 1 mm too wide.

Rather than modifying the original holder, I decided to spend hours modeling this solution instead. It may not be the most polished result, but completing the project became more important than perfecting every detail.

Hopefully, someone out there will find this helpful.

The top and main component are designed to be glued together, while the remaining parts will be bolted both to each other and to the bike.

Tagi