1 / 7
Status Dial for One Piece TCG (Print in Place)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A device used to track effects in the One Piece Card Game
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 465
- Wydruki
- 2
- Wyświetlenia
- 2175
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (34)Powiązane
Status Dial for One Piece Card Game
This file was designed to be print in place, right side up. There is a single empty layer between the top and bottom parts when printing at .2mm layer height. Fusing may occur. After printing, you may need to pry the top part off lightly with a sharp object to dislodge the pieces. Please do not use excessive force to separate the pieces. After that, the number dial should spin freely.
I made this token for the One Piece Card Game to be able to track:
- Increased/Reduced/Current Cost and Power
- Statuses
- Ability used
- Frozen/Can't be set to active
- Deck count (up to 19)
- …And more!
I have provided two files - StatusDialEmbossedNumbers.stl is made for single-filament printers. After printing, you may fill in the numbers with paint, nail polish, or your filler of choice.
StatusDialMultiColor.stl is made for printers with multi-filament capabilities, such as a BambuLab printer with AMS. In the slicer, you can fill in the colors to your liking.
Feel free to remix with your own designs!